Da-Lite SCB-100 External Serial Control Board

Description

The Serial Control Board SCB-100 allows
for control over a screen using RS-232C communication and/or relay closures.
Can be used to control most 120VAC screens or projector lift.
Electrical requirements are 120VAC 50-60HZ 10 Amp.
I/O ports include
2 motor connections to operate 1 or 2 single motor screens, a screen and
projector lift or a masking screen with 2 motors.
Connections provided by
6" wire leads.
Two RS-232 ports for connection to the optional Da-Lite NET-100
Ethernet-Serial Adaptor and/or a third party control system.
Ports 1 and 2 can
control either motor 1 or 2.
Connections provided by captive screw terminals.
Two dry contact closure (no voltage input) ports for connection of multiple low
voltage wall switches or a third party control device with dry contact closure.
Port 1 controls motor 1 only, port 2 controls motor 2 only.
Connections
provided by captive screw terminals.
(LOCATION A3)